ZCube-SC User Guide
DOC-USR-0265-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
64
Pid
*
(UDP/TSRTP/TSFILE Only)
0
–
8191
(120)
Audio PID for transport stream.
Max PTS-PCR
*
(UDP/TSRTP/TSFILE
Only)
0
–
8191
(250)
Maximum difference between the PTS and
PCR in the audio stream. It is generally
recommended to leave this value at 250.
Certain decoders may require a value similar
to the video delay. If an issue is
encountered with a specific decoder, try
setting this value to the same value as the
video delay.
Output Setup
Output Format
RTP
RTSP
UDP
TSRTP
TSFILE
RTMP
RTMPS
Output format of the encoded IP stream.
If UDP is selected, don’t forget to check the
value of TS Rate to make sure it is in line
with expectation.
RTP requires an SDP file for the receiver
that corresponds with the video codec used.
RTSP requires the use of the RTSP URL.
TSRTP causes streaming of TS over RTP. This
format is required for encoding with Pro-
MPEG Forward Error Correction (FEC).
RTMP is only supported with H264(AVC)
selected as the Video Codec.
