ZCube-SC User Guide
DOC-USR-0265-01
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
46
(3)
Once your desired image file is selected, click
Open
.
(4)
Click
Upload and Update
. A progress message will appear. Once update of firmware is completed it
will return to the main menu.
8.6
User Management
Note: User Level Access is planned for an upcoming release. Section 8.6 is not supported
in the currect ZCube-SC release
The ZCube-SC will support for up to 16 separate users. There are 8 user access levels available on the
system.
1. SuperAdmin - All operations allowed restricted to default admin user.
2. Admin - All management operations allowed with some manufacturer restrictions.
3. Operator 1 - Read sensitive data and control system (Start/Stop encode and Control PTZ).
4. Operator 2 - Currently identical permissions as Operator 1.
5. User 1 - Read non-sensitive data (View streams and settings).
6. User 2 - Currently identical permissions as User 1.
7. User 3 -
Currently identical permissions as User 1.
8. Anonymous - See limited system information before authentication.
The system is shipped with only the admin user. To add additional users do the following:
(1) Navigate to the web interface login as an admin user and navigate to the User tab.
(2) Click on the Add User button. You will be prompted for the Username, User Group, and Password.
Weak passwords will not be accepted.
(3) Once this information is entered click the Add button.
Figure 45 Software Updater Screen
