Z3Dome-4K User Instructions
DOC-USR-0188-04
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
73
need to support field separated mode. The HE265-
DEC from Z3 supports field separated mode.
Gradual Data
Refresh
*
True
False
Select
True
to enable refresh of the frame data
gradually.
Video Bitrate
(RTP, RTSP and RTMP
Only)
2K – 60M (
4M
)
Textbox for entering video bitrate. For example:
1M = 1,000,000 bits per second
1000k = 1,000,000 bits per second
2.5M = Not a Valid Format
Frame Rate
Full
Half
Quarter
Sixth
Used to encode at less than the input frame rate
(for example, an input frame rate of 30fps with
Half
selected would cause an output stream of
15fps). If interlaced input is used then this is used
to reduce the number of fields being encoded.
GOP Size
*
10 – 240 Frames
(
60 Frames
)
I-frame frequency. The number of frames in each
Group of Pictures (GOP)
Slice Mode (Single
Input low latency
mode only)
Checked
Unchecked
Advanced encoder feature – reduces latency by
about 15ms. When checked, partial blocks of a
video frame are encoded before the frame is fully
captured.
Audio Setup (if Audio Enable is set to True)
Codec
ARM AACLC
ARM AACLC MPEG2
ARM AACHE
ARM AACHE V2
Codec to be used for audio encode.
Sample Rate
48000 Hz
44100 Hz
32000 Hz
16000 Hz
Sample rate of audio.
Bit Rate
12 – 384 Kbps
(128 Kbps)
Target bitrate for audio encode.
The bitrate range for AACLC is 12-384 Kbps (though
64 Kbps or higher is recommended for best results).
The bitrate range for AACHE and AACHE V2 is 32 –
