Z3Dome-4K User Instructions
DOC-USR-0188-04
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
35
6.6
Stream Multiple Resolutions
The Z3Dome-4K supports simultaneous encode into up to three different resolutions, bitrates and
output formats. Each output stream can be set using a separate channel tab. If the CH2 tab is not
present, you can create a second channel by clicking on the
+
tab.
6.7
Setting SNTP
The Z3Dome-4K has support for SNTP to set the time on the unit. If you require the system time to be
set do the following:
(1) Load the web UI of the unit and switch to the System Setup tab. Click the go button next to Set
SNTP.
(2) Select TRUE from the Enable SNTP dropdown.
(3) Select the desired time zone for the unit form the Time Zone dropdown.
(4) Enter an NTP server address. The default is 128.138.141.172 (NIST).
(5) Click the change button. SNTP is now enabled and your system clock will be adjusted.
Note:
The encoder will need to be on a network with a route to the specified NTP server and port 123 open on
the router. If the system time is not as expected check the network settings of the encoder.
Figure 29 Setting up SNTP
Figure 28 Create Additional Output Channels
Click the “+” Tab
