Z3 Technology Z3-Q603-RPS User Manual Download Page 1

Page: 1 / 68

CONFIDENTIAL

DOC-USR-0239-04

____________________________________________________________________________________

Z3 Technology, LLC

♦

100 N. 8th St. STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

User Guide

HD HEVC/H.265 Encoding System

Rapid Production Starter Kit

Model Name:

Z3-Q603-RPS

DOC-USR-0239-04

Manual Version 4.0

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.

This document contains proprietary information of Z3 Technology, LLC ("Z3"). This document may not be used, reproduced, disclosed, or

disseminated to anyone without the prior written approval of an authorized representative of Z3. Z3 reserves the right to change this product at

any time and without notice. All product names, trademarks, trade names, service marks, or service names mentioned in this document are the

property of their respective owners.

Z3 Technology, LLC incorporates HDMI® technology.

The terms of HDMI and HDMI High-Definition Multimedia Interface, and

the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Summary of Contents for Z3-Q603-RPS





































































Search results

Summary of Contents for Z3-Q603-RPS

Reviews:

Related manuals for Z3-Q603-RPS

Brands by name

Popular brands

Z3 Technology Z3-Q603-RPS, User Manual

Search results

Summary of Contents for Z3-Q603-RPS

Reviews:

Related manuals for Z3-Q603-RPS

Brands by name

Popular brands