DOC-USR-0027-10
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
42
frames are disabled.
Noise Filter
On
Off
Turns on an optional noise filter. This helps reduce
noise in high-detail areas (for example, around
text). The tradeoff is some detail may be lost
when the filter is turned on.
GOP Size
10 – 240 frames (
60
)
I-frame frequency. [
Note 3
]
Maximum Delay
0 – 3000 (
2000
)
# of ms to buffer. The higher the value, the
smoother the encode, but also the higher the
latency (see Section 6.9, “Tuning for Latency” on
page 23).
Audio Enable
True
, False
True -> Encode audio.
Audio Info (Entries for each of the 4 subchannels within the source)
Enable
yes (for Sub Channel 1)
no
Used to select which subchannel should be used
for the audio source. Only one subchannel can be
enabled.
Codec
DSP AACLC
ARM AACLC
ARM AACLC MPEG2
ARM AACHE
The codec to use for audio.
Sample Rate
48000 Hz
44100 Hz
32000 Hz
16000 Hz
The sample rate of the audio.
Bitrate
12Kbps – 384Kbps
(
128Kbps
)
The bitrate of the audio.
Mode
Mono
Stereo
Select between stereo and mono inputs.
Source
HDMI1
HDMI2
Analog1
Analog2
Where to get audio for that subchannel.
