DOC-USR-0027-10
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
46
User name and Password.
User (RTMP Only)
User name to enter when “Authentication” is set.
Password
(RTMP Only)
Password to enter when “Authentication” is set.
stop
Stop current encode session.
start
Start encode session.
update
Can be used to change the bit rate or frame rate
divider without stopping/restarting an encode
session when using RTP mode (see Section 6.7,
“Changing the Bitrate Dynamically,” on page 18).
clone
Duplicate CH tab (can be used to quickly copy CH1
values to CH2, for example).
delete
Used to delete excess tabs created by Clone.
(status)
IDLE, STOPPED,
RUNNING, POLLING
Current status of the encoder. “POLLING”
indicates “start” was pressed and the encoder is
waiting for valid input data to be detected.
Note 1: Encode Resolutions Supported:
WQVGA (320x180), QVGA (320x240), SIF (352x240), CIF (352x288), 2-CIF (352x576), 640x360,
VGA (640x480), 4-CIF (704x576), 16:9 PAL (1024x576), D1 PAL (720x576), D1 NTSC (720x480),
720p (1280x720), XGA (1280x1024), 1080p (1920x1080), Follow input
“Follow input” = Generate encoder resolution based on capture resolution detected
Note 2:
If input is interlaced, then Frame Rate Divider will divide the number of fields used. This means, a
conversion to progressive is done. This method allows for a reduction in bits needed / processing
power without introducing extra jerkiness when there is motion in the video. For example, if the
input is 1080i at 60 fields per second (30 frames per second), Frame Rate Divider has the following
effect:
Frame Rate Divider Output # fields used frame rate
1 1080i 60 30
2 1080p 30 30
