DOC-USR-00XX-0X
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
26
(34)
When you do this, a window pops up reminding the user that, for changes to IP Address / Local
Netmask / Default Gateway to take effect, a reboot is required, and asking if a reboot is desired.
Click “Ok” (and then “Ok” to the “Are you sure?” window after that) to start rebooting.
*
Note
:
The first time this is done, it may take up to 30 seconds for the window to pop up as values
get initialized.
(35)
Now that you’ve set DHCP and saved it to the configuration “z3_config1” and specified that
“z3_config1” will be used when the system restarts, go ahead and reboot the Z3-MVE-100R.
(36)
After rebooting the Z3-MVE-100R, the new IP address obtained through DHCP should appear on the
LCD:
(37)
The second method is to use the Windows utility ZFinder. To do this, confirm a Windows PC with
ZFinder on it is connected to the same network in which the Z3-MVE-100R is connected.
Figure 28 DHCP IP Address in MVE-100R LCD
New IP address
Figure 27 Reboot Reminder for Changing IP Settings
