Z3 Technology Z3-HE1080-RPS User Instructions Download Page 44

Page: 44 / 59

CONFIDENTIAL

DOC-USR-0097-05

____________________________________________________________________________________

Z3 Technology, LLC

♦

100 N. 8th St. STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

RUNNING THE CODE YOU BUILT ON THE BOARD

To take the image files you built in Section 5.0 and run them on the RPS, follow these instructions.

z3-hiimage.img can be found in PRJROOT/imgaes.

9.1

Via SD Card

Obtain an SD card. You will need to have an SD card reader to access the SD card.

Model

Brand

Size

Note

SDSDUN-008G-G46

Sandisk

8 GB

3FMUSD16GBC10-R

Wintec

16 GB

Micro SD requires an adapter

B000YH5FOK

Sandisk

2 GB

Format the SD card.

(a)

Plug the SD card into the SD card reader on your Windows PC.

(b)

When the device is mounted, in the filesystem window right click on the device and select
“Format”.

(c)

In the format window select the default filesystem from the “File system” dropdown.
This will be either FAT32 or FAT. It is important to select the default.

(d)

Select the “Default allocation size” option from the “Allocation unit size” dropdown
menu.

(e)

Select the “Quick Format” check box and click “Start”.

Figure 37 Verified SD Cards for Software Update

Summary of Contents for Z3-HE1080-RPS




























































Search results

Summary of Contents for Z3-HE1080-RPS

Reviews:

Related manuals for Z3-HE1080-RPS

Brands by name

Popular brands

Z3 Technology Z3-HE1080-RPS, User Instructions

Search results

Summary of Contents for Z3-HE1080-RPS

Reviews:

Related manuals for Z3-HE1080-RPS

Brands by name

Popular brands