16
CONFIDENTIAL
DOC-USR-0097-05
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
7.2.1
Encoding HEVC Interlaced Streams
The HE1080-RPS can encode interlaced streams with H.265 (HEVC)
(1)
Check
Advanced settings
on the
System Setup
tab
(2)
On the Channel tab you want interlaced support on, select
Separated
from the
Video
Interlaced Mode
drop down list
Currently ffplay is the only player capable of playing the H.265 interlaced stream properly
Using the following command:
ffplay -vf tinterlace=merge rtsp://
<IP ADDRESS OF Z3 DEVICE>
/z3-1.mp4
Within the command the -vf tinterlace=merge option is what tells ffplay what to do with the
interlaced fields
7.3
Set up the Terminal Window
If you are running from a Windows PC, we recommend running TeraTerm for serial configuration and
monitoring. Select
“Setup – Serial Port” and use the following settings:
Port:
Whichever serial port the port is connected to
Baud Rate: 115200
Data:
8-bit
Parity:
None
Stop:
1-bit
Flow Control: None
If you are running from Linux, type:
# sudo minicom –s
And then configure by doing the following:
-Select “Serial Port Setup”
-Ensure the right Serial Device is specified (typically “/dev/ttyUSB0”)
-Set option E (“Bps/Par/Bits”) to 115200 8N1
-Press <return>
-Select “Exit”
7.4
Power on the Board
Connect the 5V 2A power supply.
Turn on the power switch. If all is configured properly, you will see the board booting up within the
terminal window. After 20-30 seconds, you will see the RPS Main Menu.
