CONFIDENTIAL
Z3-DM816X-PCI2-RPS V2.00.00
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
26
(d)
In the editor, you want to modify the values for nfsserver, serverip, gatewayip, netmask, ipaddr,
tftp_root, and nfs_root – as shown below:
The value for tftp_root, when combined with the value of “server_args” in your
/etc/xinetd.d/tftp
file (see step (1b)), should point to the images link you set up in step (2e).
The value of nfs_root should point to the fs subdirectory within the filesys link you set up in step
(2e).
(e)
Save your changes and then copy this file to your home directory (this will make it easy to transfer
from minicom later).
# cp u-boot-env-netra-rdk.txt /home/z3
(f)
Now set up your terminal program to take input from a file. If you are using minicom, type <ctl-A>,
and Z. This should bring up the minicom Command Summary. From here, type “T” to bring up the
“Terminal Settings” window. From here, set “Newline tx delay (ms)” (option D) to 100, and
“Character tx delay (ms)” (option F) to 1:
Figure 14 Editing u-boot-env-netra-rdk.txt
Modify to match the IP address of your Linux PC
Modify to match the netmask of your Linux PC
(should be same as Target netmask)
Modify to match the IP address of router
Modify to match your tftp and nfs configuration
(see below)
Figure 15 Minicom Terminal Settings
Change to 100
Change to 1
