Z3 Technology Z3-DM816 VI-RPS Series User Manual Download Page 41 | Manualshive

Page: 41 / 48

background image

CONFIDENTIAL

Z3-DM816X-VI-RPS RDK V2.00.04a

___________________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

th

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

41

UBI: max. allowed volumes:    128
UBI: wear-leveling threshold:   4096
UBI: number of internal volumes: 1
UBI: number of user volumes:    1
UBI: available PEBs:    0
UBI: total number of reserved PEBs: 1601
UBI: number of PEBs reserved for bad PEB handling: 48
UBI: max/mean erase counter: 1/0
UBI: image sequence number:  619039726
UBI: background thread "ubi_bgt0d" started, PID 40
davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
davinci_mdio davinci_mdio.0: detected phy mask fffffffc
davinci_mdio.0: probed
davinci_mdio davinci_mdio.0: phy[0]: device 0:00, driver unknown
davinci_mdio davinci_mdio.0: phy[1]: device 0:01, driver unknown
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
notify_init : notify drivercreated  for  remote proc id 2 at physical Address 00
Registered tvp5158 audio codec
asoc: tlv320aic3x-hifi <-> davinci-mcasp.2 mapping ok
asoc: HDMI-DAI-CODEC <-> hdmi-dai mapping ok
asoc: adv7611-hifi <-> davinci-mcasp.2 mapping ok
asoc: gv7601-hifi <-> davinci-mcasp.0 mapping ok
asoc: gv7600-hifi <-> davinci-mcasp.1 mapping ok
ALSA device list:
  #0: TI81XX EVM
  #1: APP32
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
omap_voltage_late_init: Voltage driver support not added

Power Management for TI81XX.
omap_rtc omap_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
davinci_mdio davinci_mdio.0: resetting idled controller
net eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, id=1cc915)
IP-Config: Complete:
   device=eth0, addr=192.168.81.68, mask=255.255.0.0, gw=192.168.0.1,
   host=Z3-Netra, domain=, nis-domain=(none),
   bootserver=192.168.0.6, rootserver=192.168.0.6, rootpath=
ata1: SATA link down (SStatus 0 SControl 300)
PHY: 0:01 - Link is Up - 100/Full
ata2: SATA link down (SStatus 0 SControl 300)
UBIFS: mounted UBI device 0, volume 0, name "rootfs"

«
...
39
40
41
42
43
...
»

Summary of Contents for Z3-DM816 VI-RPS Series

















































Reviews:

No comments

Related manuals for Z3-DM816 VI-RPS Series

Brand: QDI Pages: 69

RTKA788152DE0000BU

Brand: Renesas Pages: 11

TPS628436-7-8EVM-167

Brand: Texas Instruments Pages: 15

Brand: EVGA Pages: 80

Brand: Sleipner Pages: 28

Brand: NXP Semiconductors Pages: 32

Brand: Intel Pages: 113

Brand: Commell Pages: 53

Brand: Texas Instruments Pages: 20

Brand: COX Pages: 60

Brand: NXP Semiconductors Pages: 138

Brand: GigaDevice Semiconductor Pages: 16

S5U13781R00C10M

Brand: Epson Pages: 32

Brand: Epson Pages: 32

Brand: Epson Pages: 22

Brand: Epson Pages: 20

Brand: Epson Pages: 35

S5U13742P00C100

Brand: Epson Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands