Z3 Technology Z3-DM816 VI-RPS Series User Manual Download Page 38 | Manualshive

Page: 38 / 48

background image

CONFIDENTIAL

Z3-DM816X-VI-RPS RDK V2.00.04a

___________________________________________________________________________________________

Z3 Technology, LLC

♦

100 N 8

th

ST, STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

38

Memory: 222840k/222840k available, 39304k reserved, 0K highmem
Virtual kernel memory layout:
  vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  DMA    : 0xffc00000 - 0xffe00000   (   2 MB)
  vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)
  lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
  pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  .init : 0xc0008000 - 0xc003f000   ( 220 kB)
  .text : 0xc003f000 - 0xc04a8000   (4516 kB)
  .data : 0xc04a8000 - 0xc04ec0c0   ( 273 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:375
IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
Total of 128 interrupts on 1 active controller
GPMC revision 6.0
Trying to install interrupt handler for IRQ368
Trying to install interrupt handler for IRQ369
Trying to install interrupt handler for IRQ370
Trying to install interrupt handler for IRQ371
Trying to install interrupt handler for IRQ372
Trying to install interrupt handler for IRQ373
Trying to install interrupt handler for IRQ374
Trying to install type control for IRQ375
Trying to set irq flags for IRQ375
OMAP clockevent source: GPTIMER1 at 27000000 Hz
Console: colour dummy device 80x30
Calibrating delay loop... 1346.76 BogoMIPS (lpj=6733824)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
devtmpfs: initialized
TI81XX: Map 0x8ff00000 to 0xfe500000 for dram barrier
TI81XX: Map 0x40300000 to 0xfe600000 for sram barrier
omap_voltage_early_init: voltage driver support not added
regulator: core version 0.5
regulator: dummy:
NET: Registered protocol family 16
omap_voltage_domain_lookup: Voltage driver init not yet happened.Faulting!
omap_voltage_add_dev: VDD specified does not exist!
OMAP GPIO hardware version 0.1

OMAP GPIO hardware version 0.1
evm_init_begin
omap_mux_init: Add partition: #1: core, flags: 0
_omap_mux_get_by_name: Could not find signal i2c2_scl.i2c2_scl
_omap_mux_get_by_name: Could not find signal i2c2_sda.i2c2_sda
*********** z3_fpga_init returns 0
Cannot clk_get ck_32
pm_dbg_init: only OMAP3 supported
registered ti81xx_vpss device
registered ti81xx_vidout device
registered ti81xx on-chip HDMI device
registered ti81xx_fb device

«
...
36
37
38
39
40
...
»

Summary of Contents for Z3-DM816 VI-RPS Series

















































Reviews:

No comments

Related manuals for Z3-DM816 VI-RPS Series

Brand: NXP Semiconductors Pages: 6

Brand: MACHINIST Pages: 15

Brand: DFI Pages: 99

Brand: Texas Instruments Pages: 101

Brand: ECS Pages: 60

Brand: EVGA Pages: 80

Brand: Texas Instruments Pages: 9

Brand: Arbor Technology Pages: 86

Brand: Gigabyte Pages: 40

Brand: Infineon Pages: 11

Brand: Vox Technologies Pages: 36

Brand: ECS Pages: 74

Brand: Supermicro Pages: 111

Brand: Supermicro Pages: 1

Brand: MAX power Pages: 20

Brand: Linear Technology Pages: 8

Brand: Socket Pages: 37

Brand: STMicroelectronics Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands