HE2K-MINI-RPS User Guide
DOC-USR-0232-02
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
15
6.0
GETTING STARTED WITH THE HE2K-MINI-RPS
Note:
Some GUI images may reference the Z3Cam, functionality and interface is otherwise the same.
6.1
Connecting the KEL Cable
If you have received an HE2K-MINI-RPS assembly, you will need to connect it to the Sony FCB-EV7520A
camera block. The Interface Front End PCB of the HE2K-MINI-RPS assembly has a 30-pin KEL connector
that allows a flexible ribbon cable to be used to connect the encoder assembly to an identical connector
on the Sony FCB- EV7520A.
(1)
Connect the KEL ribbon cable to the Sony FCB-EV7520A block camera. (Gold teeth face up)
(2)
Connect the other end of the KEL ribbon cable to the Interface Front PCB. (Gold teeth face away
from PCB’s)
WARNING: Only use a Z3 approved KEL ribbon cable to connect Z3’s boards to the Sony camera.
Using an incorrect cable (the cables provided by Sony) can permanently damage the boards or
camera.
The KEL cable is sold separately (ordering part number: CBL-0025-01).
Figure 7 HE2K-MINI-RPS Physical Block Diagram (Camera Not Included)
