HE4K-DCK-1X User Instructions
DOC-USR-0123-06
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
12
5.0
GETTING STARTED WITH THE HE4K-DCK-1X
5.1
Connecting the KEL Cable
If you have received an HE4K-DCK-1X assembly, you will need to connect it to the Sony FCB-ER8300 4K
camera block. The Interface Front End PCB of the HE4K-DCK-1X assembly (see
) has a 30-pin KEL
connector that allows a flexible ribbon cable to be used to connect the encoder assembly to an identical
connector on the Sony FCB-ER8300.
(1)
Connect the KEL ribbon cable to the Sony FCB-ER8300 block camera. (Gold teeth face up)
(2)
Connect the other end of the KEL ribbon cable to the Interface Front PCB. (Gold teeth face away
from the PCB’s)
WARNING: Only use a Z3 approved KEL ribbon cable to connect Z3’s boards to the Sony camera. Using
an incorrect cable (the cables provided by Sony) can permanently damage the boards or camera
The KEL cable is sold separately (ordering part number: CBL-0025-01).
Figure 6 HE4K-DCK-1X Physical Block Diagram (Camera Not Included)
Figure 7 HE4K-DCK-1X Connected to FCB-ER8300 (Camera Not Included)
Sony FCB ER-8300
(Not Included)
KEL Ribbon Cable
(Sold Separately)
