DOC-USR-0113-01
___________________________________________________________________________________________
20
Making a Firmware Update
8.3
The DMD-10J supports updating of firmware through the user interface. You will need an update
image file.
(1)
Access the user interface and return to the System Setup tab.
(2)
Click the “Update device firmware” button.
(3)
This brings you to the update image screen. In this screen, click on the “Choose File” button.
(4)
This brings you to the File Selection Screen. Navigate to the .img file to update with and click
“Open”.
(5)
Click on “Upload and Update”.
(6)
You will see screens stating that the image is being uploaded and that the flash is being
updated. After about one minute, you should see the main menu again.
Figure 11 Updating the Device Firmware from the Web Interface
Click Here
Figure 12 Firmware Update Screen
