User’s Manual
35
list files
This command lists all the files in the flash file system on the RabbitLink.
put <filename>
<body of file>
<ctrl-D>
This command sends an ASCII file to the flash file system on the RabbitLink. There is a
time-out for this command: the data transfer begins no later than 60 seconds after the Rab-
bitLink senses there is no activity.
NOTE: It is faster and more efficient to transfer all files, including ASCII files,
as binary files.
filename
Identifies the file.
body of
file
Everything sent before a <
ctrl-D
> (or a <
ctrl-Z
>) is part of the
file contents.
ctrl-D
(or a
ctrl-Z
)
This is the end of file marker.
put <filename><size>
This command sends a binary file to the flash file system on the RabbitLink. There is a time-
out for this command: the data transfer begins no later than 60 seconds after the RabbitLink
senses there is no activity.
NOTE: It is faster and more efficient to transfer all files, including ASCII files,
as binary files.
filename
Identifies the file.
size
The number of bytes in the file being transferred.
Summary of Contents for RabbitLink EG2100
