12
3.ASSEMBLING THE SIDE HANDLE
Insert Bolt (J) through the Hopper Handle (22) and into the Hopper. Use Screwdriver (K) to
tighten them, as shown.
4.INSTALLING THE SMOKESTACK AND CHIMNEY CAP
1. Use Bolt (C) through the holes of Smoke Stack (16) and Smoke Stack Gasket (15),
align the hole of grill body, then attach the Gasket (H) and Hexagon Nut (F). Finally use
Wrench (D)(G)to tighten them. As shown.
2. Tighten the Chimney Cap (17) on the Smoke Stack Assembly (16). Note that the chimney
is vertical and then tightened.
