Z GRILLS ZPG-450A, Owner'S Manual

Page: 14 / 26

12
5.ATTACHING LATERAL FLAT PALLET AND FRONT FLAT PLATE
1. Insert 3 Bolts (B) through the Left Front Table Bracket (14) and into the Grill Chamber
Assembly (7).
2. Insert the Step Screw (C) through the Left Front Table Bracket (14) and Spring Washer
(E), attaching the Cap Nut (D) then using the Screwdriver (K) and Wrench (L) to tighten
them.
3. Repeat Steps 1 and 2 for Right Front Table Bracket(17).
4. Insert the Bolts (B) through Hopper Handle (43). Tighten with the Screwdriver (K). Insert
the Bolts (B) through the holes on the end of the Hopper Assembly (8).
5. Insert 2 Bolts (B) through the holes on the right side of the Grill Chamber Assembly (7)
and into the holes on the Side Table (22). Tighten with Screwdriver (K).
6.ATTACHING HEAT BAFFLE
Attaching the Heat Baffle (30) on the Firepot.