7
2.MOUNTING THE BODY FRAME
1.Secure Left Plate (34) on the Platform (42) with Bolt (A).
2.Secure Right Plate (45) on the Platform (42) with Bolt (A).
3.Secure Back Plate (41) on the Platform (42) with Bolt (A) and link with Left Plate (34) and
Right Plate (45).
4.Locate the Beam (39) between Left Plate (34) and Right Plate (45) with Bolt (A).
3.ASSEMBLING OF HOPPER
1.Insert Hopper Top Assembly (48) into Hopper Bottom Assembly (50), align the holes.
Make sure hopper opens to the front (control side). Insert the Bolts (C) through the holes in
the Hopper and Kep Nuts (D), then open the Hopper Lid and tighten it from inside. The four
sides are installed in the same way.
2.Insert Bolt (A) through the Hopper Handle (49) and into the Hopper.
