10
8. Unpacking & Assembly Instructions
The boxes and some of the components are heavy. Two people are required to safely
complete the assembly process.
Unpacking
•
Do not place painted metal components directly on bricks or concrete as it may scratch
the paint. Lay down a sheet of cardboard to sit them on.
•
It is recommended to unpack all components and lay them out before beginning
assembly.
Assembly Process
•
Follow the step by step assembly instructions on the following pages.
•
Wear gloves when handling the grease tray and baffle plate it they have a layer of oil to
prevent rusting during storage in the box.
Tools and Fasteners
•
All the required fasteners (screws, nuts and bolts) and tools are provided in the shrink-
wrapped package. Note the letter code beside each fastener as they are referred to in
the assembly instructions.
•
Take care when doing up screws not to damage the heads as they are are made of a
corrosion resistant metal alloy which is not very hard.
•
Always start the thread by hand before final tightening. If using the electric screwdriver,
use a low torque, low speed setting to avoid damaging the threads or screw heads.
A
C
M
H
D
E
J
F
I
G
L
K
B
