![background image](http://html1.mh-extra.com/html/z-edge/zai03/zai03_user-manual_4416859009.webp)
8
9. Measuring Pressure
After switching on, connect the air pipe to the measured object, and the
measured pressure value[9] shows the current pressure value.
10. Reset
After switching on, when the measured pressure value is not zero, long
press "
U/LED
" and "
SET
" key for 3 seconds to enter automatically reset.
Attention
- When the hose is unscrewed, the hose and the joint will produce high
temperature due to long time work.
- Do not touch it after a long working time.
- It is recommended to allow the device to cool down for a few minutes.
Note:
Products whose pressure are below the inflator's mininum range,
such as alloons, swimming rings, and ball for kids,cannot be measured
pressure.