11
TROUBLESHOOTING
Malfunction Solution
Slow Inflation
1. Check whether the power is sufficient.
2. Check if the air hose is leaking.
3. Check whether the connection parts at both
ends of the air hose are tight.
Can not inflate
when turning on
1. Check whether the air hose is pulled out, you
need to pull out the hose to start inflation.
2. Check whether the power is sufficient.
3. Check whether the current tire pressure value
is higher than the preset value.
Cannot increase or
decrease the preset
pressure
1. Check whether you are in an incorrect
scenario mode.
2. Select the free mode without any icon lit, and
the preset value can be adjusted within the
range of 3-150psi.
Normal inflation but
screen shows 0
Balloons and other low-pressure inflatable
products are not within the measurable range
of the device
The air pump has shut
down automatically
after screwing the valve
adapter
Long press "Start-stop button" to turn on again.
Air leakage when
connecting the hose
Tighten the hose
Wrong display
Please press "
U/LED
" and "
SET
" key at the
same time to restore the inflator.
· Before inflating, please confirm the air pressure value required by the
item need to be inflated to avoid injury caused by over-inflation bursting.
· The product has a built-in non-removable lithium battery. Please do
not throw the product into fire or discard it carelessly. The lithium
battery may cause fire, spontaneous combustion or explosion due to
overheating, impact and water ingress.
Please avoid putting it in a high temperature environment such as a
car that can be exposed to direct sunlight;
· Do not bend or step on the inflation tube during inflation to keep the
air flow smooth;
· When the air pump is working, the operator should not leave the scene,
pay attention to observe at any time to prevent the air pressure from
being too high due to unpreset air pressure;
· The machine should avoid moisture, heavy falls, water immersion and
mud or sand intrusion;
· There is a DC motor in the air pump, which may generate electric sparks
during operation.So do not put it near flammable liquids or gases
when it is working.
· The storage temperature of the product should not be lower than -10 °C
or higher than 45 ° C. Excessive heat or cold will shorten the product
life and damage the built-in battery.
· The battery may be damaged if left idle for a long time. It is recommended
to charge it at least once every three months.
· This product is not a toy, it is forbidden for children to use; keep a safe
distance from children when inflating objects.
· Before setting the inflation pressure value, please make sure that you
have selected the correct measurement unit, otherwise it may lead to
dangers such as high air pressure;
