6
+
U/LED
-
5. Preset pressure value
Press "
+
" "
-
" button: Adjust the preset pressure value.
Long press "
+
" "
-
" button: can quickly adjust the preset
pressure value.
Note:
The scene switch and preset pressure value are automatically saved by
the programm. You only need to switch the scene for the next use, and
the preset pressure is automatically set.
Press "
SET
" button to switch between the following five inflation scenarios.
Select the correct inflation scene before inflation.
Refer the default settings (below).
Car
35
2.4
40
2.7
38
2.6
8
0.5
0~150
0~10
0-65 PSI
0-55 PSI
0-100 PSI
0-15 PSI
0-100 PSI
Motorcycle
Bike
Ball
Customize
1PSI=6.89KPA 1BAR=100KPA 1kg/cm2=98KPA
3. Mode Switching
Press "
U/LED
" button to switch key, you can switch the air pressure display
unit. The unit conversion formula is shown below:
4. Unit Switching
Note:
Z-EDGE ZAI03 will automatically turn off after 3 minutes of inactivity.
MODE
PSI
BAR
Range
Long press the button to turn on/off LED lighting.
6. Using The LED Light
