Z-EDGE X2, User Manual

Page: 7 / 20

5
2. Power on your X2 Camera. Press the (5) WiFi Connect/Up button to enable WiFi
on your camera. The
indicator light on top of the camera will flash yellow yellow
when WiFi is enabled. Your camera's unique WiFi Information including network
name (SSID) and password will display on the LCD screen (12).
3. Enable WiFi on your mobile device and select the cameras WiFi network, entering
the password when prompted.
4. Once your mobile device is connected to the cameras WiFi, open the ‘Z-VergeX2’
app on your mobile device and select ‘Connect camera.’
5. The app will automatically connect to the camera and open the app home page.
6. If connection fails please check your device is still connected to the camera
network or repeat steps 2 to 5.
NAVIGATION
Power/Mode Switch Button (1)
Power ON/OFF: · Press and hold for 3 seconds to turn device ON/OFF.
· In standby mode (camera inactive, not recording or capturing images) Switch Modes:
short press button to switch between.
·
Protect Video: Short press to protect video when recording.
short press the Power/Mode button to switch between Video mode, Capture mode,
Replay mode and Settings. In the settings menu use the Up and Down buttons
(5 & 6) to navigate between the options and the Ok button (3) to select an option.
Press the Power button (1) to exit the settings menu.
Ok Button (3)
· While browsing short press button to select or confirm highlighted Select/Confirm:
item.
·
In Video Recording and Slow Motion modes short press Start/Stop Video Recording:
button to start/stop video recording.
·
In Photo Capture mode short press button to capture a photo. Shutter:
· In Playback mode short press button to start/stop video playback. Video Playback: