Z-EDGE X2, User Manual

Page: 11 / 20

9
ALL MODES & GENERAL
WiFi
To enable a connection with your device press the up button (5) on the camera.
In the settings you can set the WIFI SSID. Change the WiFi SSID inside Setup > WIFI
SSID.
In the settings you can set the Wifi Password. Change the WiFi Password inside
Setup > WIFI Password.
Screen Saver
Automatically turn off the LCD display screen after 1, 2, or 3 minutes. Turn on the
display screen again by pressing any button. Feature set inside Setup > Screen Saver.
Auto Power Off
Automatically turn off the X2 Camera after 3, 5, or 10 minutes in standby mode
(camera inactive, not recording or taking photos). Feature set inside Setup > Auto
Power Off
Language
Change the language of the X2 Camera by using the Up and Down buttons to
navigate options. Short press the Shutter/Select button to confirm device language.
Feature set inside Setup > Language.
Date-Time
Change the date and time of the X2 Camera by using the Up and Down buttons to
change each data entry (YYYY-MM-DD HH-MM-SS). Short press the Shutter/Select
button to confirm data and move to the next entry. Short press the Mode switch
button to save and exit menu. Feature set inside Setup > Date/Time.