Z-EDGE X2, User Manual

Page: 10 / 20

8
Loop Recording
With Loop Recording enabled video clips are recorded and saved to the memory card
in set durations. Once the memory card is full, the Loop Recording feature
automatically overwrites the earliest unprotected video clip. This prevents long
duration video clips from being lost in a single overwrite. Set video clip durations
between Off, 1, 2, 3, 5, or 10 minutes. Video clip duration set inside Setup >
Cyclic Record
Driving Mode
The X2 Camera can operate like a car dash camera in Driving Mode. The camera will
automatically power on and begin video recording when connected to power.
Once disconnected from power it will stop recording and automatically shut down
after a period of time. If operating as a car dash camera, Driving Mode is best used
alongside Loop Recording for the most efficient storage of video clips. The feature is
enabled/disabled inside Setup > Car Mode
PHOTO CAPTURE MODE
Photo Resolution
Set the Photo Resolution of the X2 Camera inside Setup > Image Size .
Capture Mode
Delay the capture of a single photo by up to 20 seconds after pressing the Shutter
button. Self-Timer can be set inside Setup > Capture Mode
Set the quality of the image, select from Fine, Normal, Economy. Image quality Quality:
can be set inside
. Setup > Quality
Set the sharpness of the image, select from Strong, Normal, Soft. Sharpness:
Image sharpness can be set inside
. Setup > Quality
Set the ISO of the camera, select from Auto, 100, or 200. ISO can be set inside ISO: Setup >
ISO.
Set the white balance, select from Auto, Daylight, Cloudy, Tungsten, or White Balance:
Florescent. Set inside Setup > White Balance