Z-BEN D700 Series, User Manual

Page: 22 / 41

setup] > [alternate patrol].
【
PTZ linkage
】
Set the PTZ linkage when the alarm is turned on.
Note
：
PTZ linkage is set in the [shortcut menu] >[ PTZ control]. Set the patrol between spots, trail patrol and so on.
【
screen hint
】
Pop the alarm information dialog box in the local host computer screen.
【
EMAIL
】
■ means sending an email to user when the alarm is turned on.
Note
：
Set in the [network service] and send an email.
4.3.2 Video Blind
When the video image is influenced by the environment such as bad brightness or reaching the set sensitivy parameter, the camera
mask function is turned on and the linkage function is turned on.
Picture 4.8 camera mask Picture 4.9 video loss Picture 4.10 alarm input Picture 4.11 Abnorma
Set method: refer to chapter 4.3.1.
4.3.3 Video Loss
When the equipment can not obtain the channel video signal, the video loss alarm is turned on and the linkage function is turned on.
Set method: refer to chapter 4.3.1.
4.3.4 Alarm input
When the equipment obtains the external alarm signal, the alarm function is turned on.
Set method: refer to chapter 4.3.1.
4.3.5 Alarm output
Refer to chapter 3.5.4.
Network Hard Disk Videocorder Fast Operation manual
21