Picture 4.4 motion detect Picture 4.5 set the area
【
Channel number
】
Choose the set motion detect channel.
【
enable
】
■
means that the motion detect function is on.
【
Sensitivity
】
Choose in the six options according to the sensitivity.
【
Area
】
Click setup and enter the set area. The area is divided into PAL22X18. Green block means the current cursor area. Yellow
block means the dynamic detect defensive area. Black block means the unfenced area. You can set the area as followed, Drag the mouse
and draw the area.
【
time section
】
Trigger the motion detect signal in the set time section. You can set according to week or set uniformly. Each
day is divided into four time sections.
■
means the set valid.
【
interval
】
Only one alarm signal is turned on even there are several motion detect signals in the set interval.
【
alarm output
】
Start the external equipment of corresponding linkage alarm when the motion detect alarm is turned on.
【
delay
】
Delay a few moments and stop when the alarm state is turned off. The range is 10~300 seconds.
【
recording channel
】
Choose the recording channel (multiple option supportive). Trigger the video signal when the alarm is turned on.
Note
：
Set in the [recording setup] and perform the linkage recording. Start detecting video files in the corresponding time section.
【
alternate patrol
】
■
means that the selective channel is single window alternate patrol preview. The interval is set in the [system
Picture4.6 set the time section Picture4.7 PTZ
Activation
Network
Hard
Disk
Videocorder
Fast
Operation
manual
20
