Z-IP Encode 004/008 User Guide
User Manual and Installation Guide
15
Output Setup
Use the RF Setup Page to setup each RF Output.
1.
Select
RF Output Setup from the menu.
2.
Enable/Disable
RF1-RF4 by checking or unchecking Checkbox (as required).
3.
Modify
the RF TS-ID (as required).
4.
Select and Set
RF Type.
5.
Select and Set
Channel Type.
6.
Select and Set
Ch/Freq required.
7.
Select and Set
Attenuation (if required).
8.
Select and Set
required Constellation.
9.
Modify
Interleaver (if required).
10.
Modify
ASI TS_ID (if required)
11.
Select / Remove
any ASI Program/Stream (as required).
12.
Save and Confirm
all changes made.
Application Note
When installing more than one device into a system, each device must have an unused RF TS ID.