background image

4

NOTE:

 

This was just a list

 of available features. To 

learn more about how to activate them or what they 

do, 

continue to the dedicated section of the manual 

for each set of features.

•  “

ParkCam

” activate surround and front cameras 

when ParkSense is triggered

•  “

AutoFold

” automatically fold and unfold power 

mirrors with ignition

•  “

AmberDRL

” override factory DRLs with amber

•  “

AP Kill

” disable AutoPark system

•  “

RemRestart

” automatically restart the vehicle 

once remote start times out after 15 minutes

•  “

PlsBrkSpd

” and “

PlsBrkNum

” enable and 

customize third brake light flash pattern

•  “

Winch XXXX

” define Winch Mode RPM

List of 

“Non-Menu”

 

Live Functions

(NOT IN A MENU — AUTOMATIC OR 

ACTIVATED WITH BUTTON INPUTS ONLY)

• 

activate Light Show (shortcuts)

• 

Drive Mode Memory - automatically remember drive 
mode on next restart

• 

Cooldown Mode – turn on  engine fans on-demand 

with or without the engine running

• 

Winch Mode – raise idle RPM to user-selected value 

between 1250 and 2000

• 

Hood Alarm – monitor hood when alarm is armed to 
sound the alarm and flash a light show if opened

• 

Line Lock – use ABS solenoids to lock the front 

wheels for burnouts at the track or just for fun 

(AWD 

forced off during use)

• 

Rock Crawl – lock all four brakes with a steering 
wheel button combo to hold the vehicle still, 
especially helpful when off-road

• 

TC Kill – turn off traction control, stability control 
and ABS

• 

use backup camera and added cargo/front camera 
or media player at any speed with a button shortcut

• 

Turn Assist – lock the inside back tire for sharper 
turns (button remap function only) 

• 

Remote Start Extend - remote start back to back 
an unlimited number of times (stock function only 
allows twice) if RemRestart is enabled

• 

Windows from Keyfob - open and close windows 
with a keyfob shortcut

• 

remap /-/RES buttons to:

Any of the 9 light shows

rear camera
TC Kill
Line Lock
Rock Crawl
Winch Mode
Cooldown Mode
Force RWD
Turn Assist

•  Partial Reboot

Summary of Contents for Tazer DT

















Reviews: