16
Symptom
Cause
Solution
No menu in EVIC
EVIC display has to be in a
state where it can display
radio station name
Set EVIC so it’s showing radio station
name. This
would be the the “Audio” menu on the
instrument cluster
Changed a setting and it didn’t take
effect
Full Reboot and 2 sleep cycles were not
performed
Follow the directions on
.
Changed gear ratio and “service AWD”
is showing
Incorrect gear ratio chosen or Full
Reboot and 2 sleep cycles were not
performed
Follow the directions on
and
go for a short drive to fully initialize.
Brake light flashes or the brake pedal
sinks
Brake Hold is enabled and operating or
PIN Lock is triggered
Read about Brake Hold on
Accelerator pedal is disabled, dash
displays a lightning bolt and other
errors.
PIN Lock is triggered.
Enter your PIN or reenable the pedal
with KillPedalNow. See
.
Common Troubleshooting Questions
Z Automotive cannot be held responsible misuse or consequential damages.
If you are in doubt, email [email protected].
Please be aware that modifying your vehicle in any way can affect your vehicle’s warranty, longevity, handling, etc.
Please use with caution, and AT YOUR OWN RISK.
USING THE LIGHT SHOW FEATURE ON PUBLIC ROADS: IMPERSONATING A POLICE OFFICER IS A FELONY. LIGHT
SHOW IS INTENDED FOR CAR SHOW/TRACK/OFF ROAD USE ONLY.
Z Automotive is in no way affiliated with FCA.
Protected by US Patents
10,885,039; 10,759,328; 10,431,946; 10,266,102; 9,937,850; 9,849,826;
and other patents pending.
