DynaPak 2020N 09242003 ATEX Rev.
YZ Systems, Inc. • 3101 Pollok Drive • Conroe, Texas • USA • 77303 • P: 936.788.5593 • F: 936.788.5720
5
1. Introduction
Congratulations on your purchase of the DynaPak 2020
Sampler.
Before installation, insure that all of the components are
present. You may or may not have ordered a sample
cylinder with your DynaPak System. Regardless, you will
need a cylinder during installation. If you have any ques-
tions about installation/operation, contact your YZ represen-
tative or YZ Customer Service at 936.788.5593.
2. System Components
The primary components of the DynaPak 2020 Sampler are
illustrated here.
1949
Factory
System
Approved
Mutual
Sample Discharge
DynaPak 2000 Pump
Tubing
Purge Valve
Isolation Valve
Sample Discharge
Probe Body Assembly
Note:
Filter/Regulator
YZ SYSTEMS, INC.
3101 POLLOK DRIVE CONROE, TEXAS 77303
Z-65 Controller
Cable Entry Fitting
Solenoid Valve
Patents 5,152,678; 4,531,895; 4,928,536
Wiring and Pneumatic Tubing Not
Shown For Drawing Clarity
Sample Inlet
8" (20cm)
6" (15cm)
DynaPak 2000N Pump
10 1/2" (27 cm)
8 1/2" (22 cm)
DP-2010N
YZ SYSTEMS, INC.
3101 POLLOK CONROE, TEXAS 77303
1949
Mutual
System
Approved
Factory
Z-200 Controller
Cable Entry Fitting
Patents 5,152,678; 4,531,895; 4,928,536
N