深圳市璞数技术有限公司
PAGE 13 OF 15
§3 CAUTION
3.1
Pre charging
: before running the robot for the first time, please
charge battery at least 3 hours. For the transportation reasons, the battery
before shipping only has very little electricity.
3.2
Charge temperature:
pay special attention to charging at room
temperature of 0~30 degrees Celsius. High or too low ambient temperature
can damage the battery!
3.3
External power interface:
please connect the external battery and
output DCDC power strictly according to the pin position and polarity of
the power supply interface. The wrong wiring will damage the interface
board or other devices. Make sure that the maximum current used by the
device does not exceed the limited current value of the DCDC board.
3.4
Troubleshooting:
if the robot is in the use of abnormal function,
please try to turn off the power, and then restart, in general, the robot will
be restored to normal, if restarted, the robot can not be used normally,
please notify the technical service personnel for remote guidance.
3.4
Emergency issues:
When the robot walks abnormal, please press the red emergency switch!
When the robot or charger has smoke, please turn power immediately!
When the robot is in serious collision or fall accident, turn off the power!
