13
14
Table 6 - Test specifications for ENCLOSURE PORT IMMUNITY to RF wireless communications
equipment
Accessories
Warranty Card
Test
frequency
(MHz)
Maximum
power
(W)
Distance
(m)
IMMUNITY
Test LEVEL
(V/m)
Band
a)
(MHz)
Service
a)
Modulation
b)
704-787
385
800-960
380-390
TETRA 400
LTE Band
13,17
GSM 800/900,
TETRA 800,
iDEN 820,
CDMA 850,
LTE Band 5
710
745
780
810
870
930
Pulse
modulation
b)
18 Hz
Pulse
modulation
b)
217 Hz
Pulse
modulation
b)
18 Hz
27
450
430-470
GMRS 460,
FRS 460
FM
c)
±5 kHz
deviation
1 kHz sine
28
9
28
5240
5500
5785
NOTE:If necessary to achieve the IMMUNITY TEST LEVEL, the distance between the transmitting
antenna and the ME EQUIPMENT or ME SYSTEM may be reduced to 1 m. The 1 m test distance is
permitted by IEC 61000-4-3.
a) For some services，only the uplink frequencies are included.
b) The carrier shall be modulated using a 50% duty cycle square wave singal.
c) As an alternative to FM modulation,50% pulse modulation at 18 Hz may be used because while it
dose not represent actual modulation, it would be worst case.
1700-1990
2400-2570
GSM 1800;
CDMA 1900;
GSM 1900;
DECT;
LTE Band 1, 3,
4, 25; UMTS
Bluetooth,
WLAN,
802.11 b/g/n
RFID 2450,
LTE Band 7
1720
1845
1970
2450
Pulse
modulation
b)
217 Hz
Pulse
modulation
b)
217 Hz
28
1.8
2
0.2
2
2
2
0.3
0.3
0.3
0.3
0.3
0.3
28
5100-5800
WLAN 802.11
a/n
Pulse
modulation
b)
217 Hz
0.2
0.3
9
Lanyard: 1 pc
AAA batteries: 2 pcs
User Manual, Warranty card: 1 pc
After unpacking, check the items according to the accessories list, and check whether the oximeter is
mechanically damaged. If you find any problems, please contact the local customer service center
immediately.
During the warranty service, if you need to provide circuit diagrams, necessary materials, and if there
are any problems with the maintenance of electrical circuits, please contact the manufacturer.
The device and accessories are provided non-sterile.
Thank you very much for using our products.
Product name: Finger pulse oximeter
Model: YX102/YX103
S/N:
MFG.DATE:
JIANGSU YUYUE MEDICAL EQUIPMENT & SUPPLY CO., LTD.
Manufacturer Address: No.1 Baisheng Road Development Zone, Danyang, Jiangsu 212300 CHINA
www.yuwell.com
Please reserve the warranty card carefully.