YUNEEC H520E, Quick Start Manual

Page: 7 / 47

H520E Re-Bind
The aircraft and ST16E Ground Station
are already bound out of factory. There
is no need to bind them. Pilot can follow
the steps below if rebinding is needed.
Step 1 : Power on the ST16E. Wait a few
seconds for all systems to be boot up.
Step 2 : Tap the OFDM logo on the top
right conner, then Tap the unbind button.
NO CAMERA
Fly
Takeoff
RTL
Pause
Action
Not Connected
N/A
75%
GPS
OFDM USB WIFI
No data available
Unbind
NO CAMERA
Fly
Takeoff
RTL
Pause
Action
Not Connected
N/A
75% GPS
OFDM USB WIFI
Unbind Confirm
Step 4 : Tap the OFDM logo on the top
right conner again.
Step 5 : Power on the drone until see the
dialog box shown below.
Step 3 : Tap the Unbind Confirm button
to finish the unbind process.
NO CAMERA
Fly
Takeoff
RTL
Pause
Action
Not Connected
N/A
75% GPS
OFDM USB WIFI
Next
Use a paperclip to set the Vehicle into Autobind mode
Click Next to proceed once LED starts blinking