Revised 04/04/08
ALLURE ELECTRONIC Install & Ops Apr08
Page 12 of 23
REMOVING PANELS
1) GRATE
Lift up and out.
2) HEARTH
Lift up and out.
3) FASCIA FRONT
Remove four screws, two are just in from the
sides at the top, and two at the bottom left and
right. Lift the fascia up and out.
3a) BOTTOM FASCIA STRIP
(Not shown) This part may be fitted along the
base of a regular three-sided fascia to give a
“picture frame” effect. When the fascia front is
removed you will see where the bottom strip is
fitted using two screws.
4) TOP LOUVRE #1 (Top)
Slides out.
5) TOP LOUVRE #2 (Bottom)
Remove 2 screws and slide off.
6) BOTTOM CONTROL AND GRILL
Remove 2 screws and lift out.
7) COWL TOP FRONT
Remove 2 screws and slide out. This will give
access to flue spigot (visible when fascia is
removed).
1
2
3
6
4
5
7
3
3
3