38
2. Installation
2.1
Unpacking and positioning
1.
Unpack the appliance carefully. Dispose of the packaging as described in
chapter
WASTE MANAGEMENT
.
2.
The appliance may be equipped with a the transport-protection. Be very careful
and do not use any aggressive or abrasive detergents to remove residuals of the
transport-protection.
3.
Check that the appliance and the power cord are not damaged.
4.
Connect the appliance to a dedicated socket only.
5.
Do not install the appliance in a place where it may come in contact with water
or rain; otherwise the insulation of the electrical system will be damaged.
6.
Connect the appliance to the mains properly.
2.2
Installation
WARNING!
1. The hob must be installed by a qualified professional. Do not carry
out the installation yourself.
2. Do not install the appliance above cooling equipment, dish washers
or laundry dryers.
3. When installing the appliance ensure optimal heat radiation to
maintain the operating safety.
4. The wall and the reach of the heat radiation above the worktop must
be made of heat-resistant materials.
5. To avoid any damage, the sandwich layer and adhesive must resist
heat.
6. Never use a steam cleaner.
The safety distance between the hob and a cupboard above should be at least
760 mm.