19
Sakura Multifunction Rice Cooker by Yum Asia
9. CLEANING AND MAINTENANCE
Always remove any remaining pieces of food and clean immediately after use.
Do not use any kind of metal brush, scrubber or harsh chemicals/solvents to clean the dirty parts of the
appliance. If anything remains stuck to the inner bowl, pre-soak with a little washing up liquid before washing
Do not immerse the appliance in water. Use a damp sponge or soft cloth to clean the outer case.
IMPORTANT
- Never put the inner bowl or inner lid into a dishwasher. The chemicals and washing cycle of a
dishwasher are too harsh.
Any damage caused by a dishwasher will not be covered by our warranty.
INNER LID CARE
The inner lid of this appliance is removable. Pull the locks at the bottom
right and left of the lid, taking it out of its holder. Wash the removable lid
after each cooking cycle with a sponge in soapy water.
To put the inner lid back, slide the two top tabs in at the top and push on
the release locks at the bottom until you hear a click.
IMPORTANT INNER BOWL CARE
Only ever use the plastic accessories provided, you can also use wooden or
silicone accessories. Never use metal to stir as this will damage the ceramic
coating on the inner bowl.
Cleaning the inner bowl is easy, but if anything remains stuck to the inner
bowl, pre-soak with a little washing up liquid before washing.
Do not pour vinegar into the inner bowl as this will damage the ceramic
coating.
The outside (underneath) of the inner bowl will discolour and scuff due to the heat being applied to the bowl
from the heating element, this is normal. The ceramic coating on the inner bowl may change colour over time. This
is completely normal and nothing to worry about.
STEAM CAP CARE
The steam cap on top of the lid is removable – pull upwards to remove.
Wash this on a regular basis.
The removable steam cap can also be full dissembled to ensure full cleaning –
ensure this is put together properly before use.
CONDENSATION COLLECTOR CARE
The condensation collector on the back of the appliance can be removed. Pull on
the small handle but be careful not to pull up or down, pull in a straight line
otherwise the small handle could break.
Remove and empty the condensation collector. Wash, dry and install it back into
place.
