•
Viewing the target through the riflescope place the edge of one post against one edge (top,
bottom, or either side) of the target so that the crosshair extends along either its width or
height.
•
Using the dots, measure along the crosshair to the opposite edge of the target.
•
Once the measurement of the target has been estimated in mils, use the following formula to
determine the range:
The Measured object's width or height in Yards x 1000
--------------------------------------------------------------------------- = Range in Yards
Object's Width or Height in Mils
or
The Measured object's width or height in Meters x 1000
----------------------------------------------------------------------------- = Range in Meters
Object's Width or Height in Mils
or
The Measured object's width or height in cm x 10
----------------------------------------------------------------------------- = Range in Meters
Object's Width or Height in Mils
Example:
1.33 yards x 1000 / 2.5 mils = 532 Yards
•
When making windage/elevation adjustments please
note that one click of the riflescope's adjustment
equals to:
For the model Sentinel G2+ 3x50:
0.527 MOA (minute of angle); 0.5519”/100yds;
1.533cm/100m
For the model Sentinel G2+ 4x60:
0.4235 MOA ; 0.4435”/100 yds; 1.232cm/100m
1 mil (millirad) equals 3.6 inches at 100 yards
or 36 inches at 1,000 yards,
or 10 centimeters at 100 meters
or 1 meter at 1,000 meters.
1 millirad (1 mil) = 0.001 of the distance = 3.4377 MOA
Further information on the use of the Mil-Dot reticle (reference charts, calculators etc.) you
can find at the following links:
http://www.mildot.com
http://www.mil-dot.com/Mil_Dot_User_Guide.htm
http://www.shooterready.com/mildot.swf
INSPECTION
It is recommended to inspect the Sentinel G2+ before each use for:
