background image

The YuJet battery has a set of LED lights on the top of 

the  battery  for  easy viewing while  riding. These  LEDs 

indicate the battery level and activation. If these lights 

turn  on  the  battery  is  activated  and  will  display  the 

remaining battery level.

The  LED  and  battery  activation  will  turn  off  if  left 

unattended  for  a  length  of  time.  To  reactivate  the 

battery,  remove  the  safety  magnet,  wait  for  a  few 

seconds,  then  place  the  safety  magnet  back  onto  the 

battery.

LED Indications

Wrist  Strap: The  wrist  strap  must  be  used  at  all  time 

while  operating  the  YuJet  personal  watercraft.  In  the 

event of a fall the wrist strap prevents the remote from 

being  thrown  out  of  reach  of  the  user. The  remote  is 

fully  waterproof  and  will  float  in  case  the  wrist  strap 

breaks. 

The YuJet PWC has two modes of operation. Out of the 

box  your  YuJet  personal  watercraft  will  be  set  to 

beginner mode. At any time, the user can change from 

either mode by tapping the power button 3 times. Your 

board will remain in that mode until you choose another 

mode.

Beginner  mode:

  (Blue  BEG  indication)  is  designed  to 

have  a  smooth  power  curve  and  limited  maximum 

speed. This is perfect for the new user, or the user wants 

to conserve battery power for longer rides.

Expert Mode:

 (Orange EXP indication) unleashes the full 

potential  of  the YuJet  personal  watercraft. This  mode 

gives you the most amount of acceleration and top end 

speed. This mode is great for the experienced rider with 

speeds  up  to  25  mph.  (speed  is  dependent  on  rider 

weight and water conditions)

4: The battery is activated by adding the safety magnet 

to the contact area. The LED battery status indicator will 

light  up  and  remain  on  showing  the  level  of  battery 

power.

5: Secure the latches by turning them 180º and lowering 

the  tabs.  If you  find  it  difficult  to  turn  the  tabs,  press 

down or tap the top of the battery until the latches are 

free to turn. 

BOARD SETUP

BATTERY STATUS

REMOTE OPERATION

BEGINNER AND SPORT MODE

INSTALLING THE BATTERY

5%

25% 50% 75% 100%

Summary of Contents for Surfer













Reviews: