Daily alarm set-up
•
Press “M” to switch from time display to A1 display
•
Press and hold the key “MODE” for 3 seconds ,the flashing alarm time are shown
•
The hour display of the alarm time is flashing. Use “
▲
“ and “
▼
“ to select the hour.
Press “M” to confirm.
•
then follow the minutes. Use “
▲
“ and “
▼
“ to select the minutes,
Press “M” to confirm.
•
The same setting as for A2.
Daily alarm on/off
•
1st press “
֠
“ to activate the alarm 1 with alarm symbol showing.
•
2
nd
press “
֠
” cancel the alarm 1, then activate the alarm 2 with alarm symbol showing
•
3
rd
press
֠
“ to activate the alarm1 and alarm 2 with alarm symbol showing.
•
4
th
press “
֠
” cancel all the alarms
Information:
•
The clock automatically changes from set-up mode to time mode if no keys are pressed for
20 seconds.
•
The alarm sounds for 2 minutes if no key is pressed to stop it.
Snooze function
To activate the snooze function, follow the steps below
•
Press the key “SNOOZE/LIGHT“, while the alarm sounds, to activate the snooze function.
•
If the snooze function is activated
,
alarm symbol is flashing.
•
The alarm repeat after 5 minutes.
•
The snooze function can be stopped by pressing any key.
12/24 hours mode
The time display can be in 12
（
AM/PM
）
or 24 hours mode, please follow the manual set-up to
select
°C/°F temperature display
The temperature display can be in °C or °F, please follow the manual set-up to select.
Max./ Min. for the indoor/outdoor temperature and humidity
Press
“
▲
“
” for displaying of indoor/outdoor max./min. of temperature and humidity, hold
“
▲
“
for more than
3 seconds to clear up the max./min.
Temperature alert set-up
•
Press “A” for more than 3 seconds, the upper limit of inside temperature is flashing, use
“
▲
“ and “
▼
“
to set the maximum alert temperature.
•
Press “A “, the lower limit of inside temperature is flashing, use
“
▲
“ and “
▼
“
to set the
minimum alert temperature.
•
Press “A” , the upper limit of outside temperature is flashing, use
“
▲
“ and “
▼
“
to set the
maximum alert temperature.
