NOTES:
•
First insert the batteries of main unit, then insert the batteries of the outdoor sensor within 3
minutes after the main unit is powered on, to assure that the sensor data is received well.
In case of the outdoor sensor data is not received, please press
֠
֠
֠
֠
key for more than 3
seconds to synchronize the sensors signal again.
•
Every time the batteries are replaced in the main unit, it will loose all the weather data.
•
Every time the batteries are replaced in the sensor unit, it will synchronize with the main unit
only if you press the
֠
֠
֠
֠
key for more than 3 seconds.
•
Mounting the main unit
The main unit can be placed onto any flat surface or wall mounted at the desired location by
Hanging hole, It is important to check that the radio signal can be received before mounting.
