•
Press “A “, the lower limit of outside temperature is flashing, use
“
▲
“ and “
▼
“
to set the
minimum alert temperature.
•
When the alert is activated, the alert symbol will be shown.
.
Temperature alert on/off
Press and hold the key “A“ to set the temperature alert on or off.
•
Alert on: Temperature alert symbol shown in display
•
Alert off: Temperature alert symbol goes out.
Information
•
The set-up process cannot be completed if the maximum temperature selected is lower than
the minimum selected temperature.
•
The minimum temperature selected must at least be 1°C below the maximum selected
temperature.
5 Weather forecast
Sunny Slightly Sunny Cloudy Rainy Storm
Remarks
：
as the weather is forecasted by air pressure only,
The display will have discrepancy with the actual weather sometime.
Barometer and bar and data of history for the past 12 hour of air pressure.
Air pressure can be in hPa and inHg ,and have bar of the past 12 hours.
Wind speed in mph/kmh ( 0~256kmh)
The wind speed can be shown in mph and kmh, please follow the manual set-up to select
mph/kmh, the display of the speed is updated in case of the sensor updated every 1 minitues.
Wind direction
There will be 16 wind directions, the display of the direction is updated in case of the sensor
updated every 1 minutes
Rainfall display ( 0~999.99mm)
•
Rain fall can be shown in mm and inch, please follow the manual set-up to select the
mm/inch.
•
Press
“
▼
“ to show the rainfall in 1 hour, press again 24 hours, then TOTAL.
•
Press “
▼
“ for more than 3 seconds to clear up the volum accordingly, such as if showing 1 hour,
clear up the data in 1 hour, others unchanged, if showing 24 hours, clear up the data in 24 hour,
others unchanged.
•
The max. of the rainfall is up to 999.99mm (99.99inch), the display is flashing in case of the max.,
you have to clear up the data by hand, otherwise, the data can not be updated any more.
