YTL YTL31102, Instructions & Assembly

Page: 15 / 19

- 15 -
WARNING
Improper maintenance and storage of the plug aerator may void your warranty.
MAINTENANCE

Rinse/dry inside and outside of the aerator after each use.

Before operating make sure the tires have the RECOMMENDED TIRE PRESSURE 25 PSI.

Regularly grease axle and wheel bearing area or when needed.

Periodically check all fasteners for tightness.

Annually clean and lightly lubricate
spool assemblies and shaft or when needed.

Use a glossy enamel spray paint to touch up scratched or worn painted metal surfaces.

Plug spikes periodically need to be sharpened with a small grinder to maintain good
penetration. Spools should be removed to sharpen the points. Always follow the original
angle and contour of the points when grinding.

Never exceed tray load capacity rating of 140lbs it will damage the plug aerator.
IMPORTANT:
If a part needs replacement, only use parts that meet the manufacturer
’s specifications. Replacement
parts that do not meet specifications may result in a safety hazard or poor operations.
STORAGE

Never allow the extra weight to remain on the aerator for extended periods of time.

Before storing make sure the aerator is clean and dry for years of trouble free service.

Lightly lubricate all aerator surfaces and moving parts to prevent rust.

Store indoors or protected area during severe weather and winter months.
Maintenance and Storage