INSERTING THE REAR WHEEL & ASSEMBLY STAND INSTRUCTIONS
a
Lift the frame out of the rear stand.
Place the rear stand upright...
b
… so that you can place the frame on it again as pictured
(this way, the rear wheel can be inserted into the rear dropouts
without having to turn the bicycle upside down).
c
Remove the rear axle by unscrewing it with the lever on the left side.
Remove the transport lock from the axle.
d
Remove the pad spacer from the caliper by pulling it straight downwards. Store the
spacer in a secure location as it can be used to prevent the brakes engaging and pushing
the brake pads out when transporting the bike without its wheels.
e
Place the rear wheel into the frame and place the chain on the smallest cog.
f
The chain must be on the smallest cog
(Please shift the derailleur into the smallest gear by using the shifter).
Check that the rear wheel is inserted correctly and that the brake rotor sits
between the brake pads. If everything is inserted correctly, the rear skewer can be reinserted.
Tighten the skewer very fi rmly by hand.
Release the derailleur cage by rotating it forwards until the lock button disengages.
a
c
e
b
d
f
STEP
07
eng
