YT Industries Jeffsy, Manual

Page: 35 / 72

y t 3 5
EN
Place the rear wheel in the frame. Make sure
to place the chain on the smallest cog of the
cassette. Carefully pull the shifter rearwards
to make the insertion easier.
Press the derailleur cage forwards to release
the CAGE LOCK. Once released, carefully
guide the cage rearwards until it puts tension
on the chain.
SRAM
REAR WHEEL ASSEMBLY
Rear wheel axle // 10 – 15 Nm
Please follow the
torque specifications of
the manufacturers:
Insert the axle to the very end and tighten it
clockwise afterwards.
Tighten the rear axle fi rmly by hand with around
10 – 15 Nm torque.
By pulling out the lever you can change its
position. The lever should be pointed to the
front alongside the seat stays to avoid being
damaged.
5.4
5.1
5.4
5.2 5.3