8. Flip the Storm over and place the rubber gasket on
the bottom side into place (
Figure 11
).
9. Place bottom mounting plate into place lining up the
screw holes with the holes in the main case (
Figure
12
).
10. Insert the 4 screws and tighten until snug
11. Finally finish tightening the 4 screws holding the
top mounting plate in place (
Figure 13
) and the
reassembly is complete.
Figure 11: Place the rubber gasket into place
Figure 12: Bottom mounting plate lining up with the holes
Figure 13: Tighten the 4 screws into place
ysi.com/storm3
D114
I
Tech Note
I
Storm 3 SIM Card Replacement
