background image

Tel +1.937.767.7241   |   800.897.4151   |   [email protected]   |   YSI.com

YSI Inc.   |   1725 Brannum Lane   |   Yellow Springs, OH  45387

© 2017  Xylem, Inc.  All rights reserved.   

For further information, please contact:

Website: 

YSI.com/storm3

Email: 

[email protected]

  

Phone: 800-897-4151  
or (+1) 937-767-7241

YSI, a Xylem brand manufactures environmental monitoring 
instruments and systems. Formerly known as YSI, the group is a 
market leader with a reputation for high levels of accuracy and 
reliability. The company’s water quality measuring instruments 
are designed for both laboratory and field use. In addition to 
bench top and hand-held instruments, Xylem Analytics also 
builds monitoring systems and wireless networks that are able 
to operate in remote locations and challenging environments. 
The company’s water quality monitoring sondes can be fitted 
with a wide variety of sensors including dissolved oxygen, PH, 
temperature, turbidity , conductivity, salinity, ORP, chlorophyll, 
open-channel flow, vented level, ammonia, chloride, rhodamine, 
depth photo synthetically active radiation.

Easily configure and collect data using the 
browser-based graphical user interface with 
all standard web browsers on PCs, tablets and 
smart phones. 

Summary of Contents for STORM 3







Reviews: