Ypsomed mylife Unio Cara User Manual Download Page 2

Page: 2 / 76

Thank you for choosing the mylife

™

Unio

™

Cara blood glucose monitoring system. Please read this user guide

thoroughly before testing your blood glucose. It provides all information you need to use the product. The
mylife

™

Unio

™

Cara blood glucose meter must only be used with mylife

™

Unio

™

test strips and mylife

™

ControlGDH

control solution. The use of other test strips or control solutions may lead to incorrect test results.

It is recommended that the blood glucose level should be monitored regularly. The mylife

™

Unio

™

Cara blood

glucose monitoring system is accurate and easy-to-use, and is therefore your reliable diabetes management
assistant.

The mylife

™

AutoLance

™

lancing device and mylife

™

Lancets are intended for patient self-monitoring by an

individual. They must not be used on more than one person due to the risk of cross-contamination.

The mylife

™

Unio

™

Cara blood glucose monitoring system is manufactured by Bionime Corporation and distributed

by Ypsomed Distribution AG.

If you have any questions or concerns, please contact your local Ypsomed customer service (see page 72).

Preface

Summary of Contents for mylife Unio Cara













































































Search results

Summary of Contents for mylife Unio Cara

Reviews:

Related manuals for mylife Unio Cara

Brands by name

Popular brands

Ypsomed mylife Unio Cara, User Manual

Search results

Summary of Contents for mylife Unio Cara

Reviews:

Related manuals for mylife Unio Cara

Brands by name

Popular brands